NEW PERMALEX PART NUMBERS:
CROSS REFERENCE TO OEM ORIGINAL BLADES:
A: MPM UP-1500, QUAD, SMTECH, UP-500
34mm WIDE, 40mm Hole to Hole Spacing
(for other widths, replace
“34” with your desired mm width dimension)
OPTIONS AVAILIBLE FOR ABOVE (add codes shown to part numbers above)
-WH (whole blade Permalex) -A45 (bend in blade for 45 Deg
Angle of attack
-0.008 (change thickness from 0.010 to 0.008inch)
B: DEK 265, DEK HORIZON, DEK INFINITY, DEK 248, DEK 260
30mm WIDE, 44mm Hole to Hole Spacing
(for 25mm WIDE, replace
the “30” with “25”;
for other widths,
enter your desired width)
OPTIONS AVAILIBLE FOR ABOVE (add codes shown to part numbers above)
-WH (whole blade Permalex) -A45 (bend in blade for 45 Deg
Angle of attack
-0.008 (change thickness from 0.010 to 0.008inch)
C: EKRA X4, X5, MAT-S55A, MATS40, E5,
33mm WIDE, 40/50mm Hole to Hole Spacing
(for other WIDTHS,
change the “33” to the desired WIDTH in
mm)
OPTIONS AVAILIBLE FOR ABOVE (add codes shown to part numbers above)
-WH (whole blade Permalex) -A45 (bend in blade for 45 Deg
Angle of attack
-0.008 (change thickness from 0.010 to 0.008inch)
C: SPEED-PRINT EUROPLACER
40mm WIDE, 50mm Hole to Hole Spacing
(for other WIDTHS,
change the “40” to the desired WIDTH in
mm)
OPTIONS AVAILIBLE FOR ABOVE (add codes shown to part numbers above)
-WH (whole blade Permalex) -A45 (bend in blade for 45 Deg
Angle of attack
-0.008 (change thickness from 0.010 to 0.008inch) |
